Garbage-Disposal-Reviews.org

What is the best garbage disposal?

Tag Archives: Garbage Disposal

How to Fix Garbage Disposal

One can fix garbage disposal problems pretty easily if they know exactly what the problem is. Currently one of the most common concerns with the device is a stuck flywheel that causes it to stop turning. This kind of problem can usually be detected by the small humming noise the garbage disposal lets off when turned on.

Following are some of the steps this unit can be fixed.

Cut off the Power
This is the most important step of all so don’t forget it! Skipping this one can cause injuries when working on the device so make sure the plug us pulled off the garbage disposal unit.

Dislodging the Flywheel
There are actually several ways of dislodging whatever is stuck in the flywheel. The first and probably the easiest are using the offset wrench usually provided along with the garbage disposal unit. For those who have misplaced their wrench, most hardware stores have a replacement so dropping by and purchasing one is fairly easy.

Once the wrench is on hand, simply push it down until it reaches the flywheel. Simply turn the flywheel until whatever is dislodged breaks free and that the flywheel manages to turn around again. Make sure that the turning motion of the wrench is clockwise since this is the motion in which the flywheel moves.

Checking the Garbage Disposal
After the flywheel starts to turn around freely, it’s time to try out if the problem is solved. Reconnect the unit but don’t turn it one yet. Check out the bottom and look for the red Reset button and simply depress this before turning the device on and off. Pushing in some water might also be useful to smooth out the turning process as well as remove other waste residues.

This should be able to fix garbage disposal and could be done by someone relatively inexperienced. Just keep in mind that no matter what happens – the hand must NOT get within the device. Use something sturdy and unbreakably instead.

Of course, there are also other problems one might encounter with their garbage disposal unit. For example, it could be leaking or not running altogether. When these problems occur, it is important to understand the anatomy of the garbage disposal to be able to pinpoint exactly where the leak is coming from. After knowing where it is, then that is the time to address the problem.

As for the “not running” problem, this is usually dealt with through checking the connections of the unit or pushing on the Reset button. Should there be any problems beyond that, then calling the expertise of a technician is the best option possible. Considering how much a garbage disposal costs, it’s crucial that major fixes are done by a professional.

Keep in mind that regardless of what fix garbage disposal option is available, it is important to completely unplug the device and not just turn the switch off. Safety should be the major concern of every individual utilizing the garbage disposal unit.

How to Unclog Garbage Disposal

After heavy use, it is important to unclog garbage disposal to ensure that it would still be working perfectly after a few days. Although the unit’s main purpose is to pulverize food particles to make them easier to pass through, the fact is that this isn’t always the case. Hence, there are chances when even the small particles manage to form a big wall that causes the unit to be blocked and therefore function poorly.

The good news is that it is easy to unclog garbage disposal. All it takes is a bit of know-how as well as patience from a person. That being said, following are some tips on how to unclog the garbage disposal unit.

Safety First
Always UNPLUG the unit before attempting to do any fixes on it. Keep in mind that placing the hand inside the drain is NOT recommended.

How to know if the Unit is Clogged
There are several symptoms a person can look out for to find out if their unit is clogged. Usually this means that when the unit is switched on, it just gives off a humming noise without actually running. This means that the main machinery is working but the spinning device is not capable of moving due to a blockage. In some cases, the water would not drain down due to the number of debris stuck within the holes.

So how can this be removed?
One of the age-old methods is the use of baking soda and vinegar. Basically, the first is poured down the drain followed by the vinegar. The two are allowed to fizz together for several minutes before being washed off using warm or boiled water.

Currently, there are also products sold in the market that work well with getting rid of garbage disposal clog. Ideally, one should purchase an item that also gets rid of the odor brought on by a clogged garbage disposal.

Using a wrench to reach to the flywheel and turn it clockwise to dislodge whatever is stuck on the surface is also possible. However, this usually doesn’t work if the clogging is caused by multiple numbers of debris, which formed a solid wall on the drain.

How often should one unclog their garbage disposal?
Ideally, one should do this task at least once a month or when it starts to smell. However, it would be better to start the cleaning process before the drain actually stinks because this would necessitate numerous use of cleaner in order to get rid of the odor.

Like many other devices, the garbage disposal only works best when kept at top form. Usually, it only takes a small amount of maintenance to avoid heavy repairs – or the purchase of new garbage disposal – in the future. Considering how expensive the item is, it’s crucial to be as careful as possible. Plus, nobody really wants their kitchen to be smelling of something rotten. Unclog garbage disposal after a particularly heavy use too like after parties, birthdays, Christmas, New Year and others.

How to Install Garbage Disposal

Garbage disposal installation is not as hard as most people think. In fact, a person with a bit of know-how when it comes to electrical installations can easily learn how to install the device through careful perusal of its manual. Of course, for those who have absolutely no idea about wirings and tools, it might be necessary to call for help just to be on the safe side. That being said, following are the steps on how to install a garbage disposal system.

Cut the Power Off
Regardless of whether one is installing a new garbage disposal or simply replacing an existing one, it is always important to cut the power off from where the device is plugged in. This ensures that no accidents will happen during the course of garbage disposal installation.

Disconnecting the Waste Assembly
Make sure to have a bucket and some towards on hand before starting this step. Simply disconnect the waste assembly starting from the sink flange to the trap while keeping the bucket directly at the bottom. This will catch any water and waste materials that might fall on the floor. Now there should be one gaping hole on the bottom of the sink.

Clean it up
Before attaching the mounting assembly to the sink flange, make sure to clean up the sealant that may be stuck around the material. This will make installation better and ensure that the garbage disposal would be able to function perfectly.

Attaching Mounting Assembly to Sink Flange
One clean up is done; start connecting the mounting assembly to the sink flange. Carefully insert the ring over the flange but make sure that the flange is in proper position first. Make sure to check out the manual to find out proper gasket replacement. Tighten the screws as much as possible to ensure that the material stays on.

Garbage Disposal and Mounting Assembly
Prior to installing the garbage disposal, check out the P-trap to see if there are any remnants that should be removed. The dishwasher drain connection must also be prepared beforehand since this would be difficult after the disposal is actually attached to the mounting assembly. Next up, start connecting the disposal to the assembly, making sure that the mounting tabs fit perfectly below the mounting tracks. The lower mounting ring should be able to lock with the mounting tabs when rotated using a wrench or any tool appropriate.

The discharge tube of the disposal must be aligned with the drain trap.

Power On
Lastly, connect the unit to a power source and try it out. However, for beginners, it is recommended that they ask the help of a licensed electrician for the procedure to ensure safety.

All in all, garbage disposal installation takes time and patience but not really as complicated as most people think. The fact is that the process only requires careful perusal of the specific manual before a person can start attempting the project. Keep in mind that since there are different models of garbage disposal, installation methods may vary.